Cressi
Scorpion
Scorpion
Couldn't load pickup availability
SCORPIONΒ It is a 100% dorsal volume vest, versatile for all types of diving, with a robust but lightweight construction at the same time (2.5 kg size M) and with a small carrying volume but robust and very flexible.
The system ofΒ fully independent harnessΒ The jacket is made of a soft, breathable material that provides absolute stability of the vest on the diver and completely relieves the chest, armpits and abdominal areas from oppression due to the expansion of the jacket towards the outside of the dorsal area and surrounding the tank. Its pattern and harness arrangement make it 100% unisex.
Shoulder pads with internal seams to avoid any chafing even when diving without a suit.
Ventral strap with a pulley-effect tensioning system that guarantees optimal fixation of this critical point for the stability of the vest on the body.Β The tensioning maneuver is carried out by moving the strap rings 90ΒΊ outwards instead of to the sides.
Abdominal area withΒ low-profile lobes and large zippered accessory pockets.
Dorsal air chamber with a high lifting capacity (19 kg size M) but with a always contained external stowage volume, thanks to the elastic containment tensioners that have the additional mission of facilitating the emptying maneuver and preventing air displacement during immersion that would cause instability.
Foldable structureΒ very useful for storing the vest, especially if there is little space in the bag (diving trips). However, unlike many vests considered "for travel", the stability of the bottle underwater is not compromised thanks to the rigidity of the padding, the configuration of the air chamber that acts as a guide for the bottle and the double strap.
Harness completely covered with comfortable, neutral buoyancy padding made from a closed-cell material that prevents the accumulation of water or air, thus reducing the inherent buoyancy of the vest and facilitating quick drying.
LAS ballast system (Lock Aid System)2.0 vertical,Β The system is located in line with the bottle behind the pockets and perfectly integrated into the profile of the vest. This system, following the Cressi tradition, guarantees maximum ease of insertion and removal of the ballast with total safety against accidental loss since its anchors incorporate a spring (patented) to prevent accidental snagging.
Direct System Inflator:Β Double metal filter at the air inlet under the stem and cylindrical around the valve. Very robust and attractively designed body. Recalibrated inflation speed, 50% higher (traditional M-size vest in 4 seconds at 1 atm). Sand-proof design with minimized mouth inflator nozzle. Push button with wide clearances from its seat to prevent the blocking action of grains of sand. Drain push button sealed by silicone washer. Inflation push button integrated into profile to prevent unwanted inflation when pulling the trachea to drain. New, very resistant trachea with very progressive curvature. Integrated hose-guide clamp.
New upper discharge valveΒ Low profile with non-return valve that prevents accidental water entry.
4 ABS rings.
"Y" hose holder.
Combination of Nylon 420 D + 3 other fabrics.
Technical characteristics:
- Lifting capacity (measurements according to CE regulations): XS: 13.3 kg; S: 13.3 kg; M: 15.3 kg;
L: 15.3 kg; XL: 15.3 kg
- Weight in Kg: 2.4 (XS), 2.45 (S), 2.50 (M), 2.60 (L), 2.65 (XL)
IMPORTANT NOTE:
The configuration of this vest prioritizes maximum freedom of movement, for this reason the shoulder pads are axillary and the pockets are low profile, in order to free up the pectoral and ventral areas. The attachment of the vest to the body must be based on the tension of the waist belt-ventral strap assembly, while the axillary straps must be tightened only as much as necessary without reaching the limit (a common error among many divers) which would cause the vest to be folded over itself and excessively raised.
Share product











